Photoelectric sensors
G2S, Photoelectric proximity sensor, Background suppression   Type GTB2S-N5311 Part No. 1064349   At a glance   Reliable detection of black and white objects at distances up to 15 mm   Background blanking from 18 mm   Laser-type light spot 2 mm in diameter at a distance of 8 mm Your benefits   Faster machine cycles due to the brilliant, small light spots that allow accurate switching points and small gaps between objects   Universal use, since the sensors detect objects independent of their remission, object contours and backgrounds   High throughput and less downtime due to the sensor's ability to suppress active and passive interference in industrial environments.   The 45-degree tilted cable entry offers maximum installation flexibility with additional soft rubber bearings to absorb vibrations and tensile loads   The powerful PinPoint LED permits reliable detection of jet-black and poorly reflective objects

Features
	Sensor/detection principle:	Photoelectric proximity sensor, Background suppression
	Dimensions (W x H x D):	7.7 mm x 21.8 mm x 13.5 mm
	Housing design (light emission):	Rectangular
	Sensing range max.:	1 mm ... 18 mm 1)
	Sensing range:	4 mm ... 15 mm 2)
	Type of light:	Visible red light
	Light source:	PinPoint LED 3)
	Wave length:	640 nm
	Light spot size (distance):	Ø 2 mm (8 mm)
	Background suppression typ. from:	20 mm

1) Object with 90 % reflectance (referred to standard white, DIN 5033)  2)Object with 6 % remission  3) Average service life of 100,000 h at TA = +25 °C

Mechanics/electronics
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	≤ 5 Vpp 2)
	Power consumption:	≤ 20 mA 3)
	Output type:	NPN
	Switching mode:	Light switching
	Output current Imax.:	< 50 mA
	Response time:	< 0.6 ms 4)
	Switching frequency:	800 Hz 5)
	Connection type:	Cable with connector M8, 3-pin, 200 mm 6)
	Cable diameter:	Ø 3 mm
	Circuit protection:	A, C, D 7) 8) 9)
	Optics material:	PMMA
	Enclosure rating:	IP 67
	Ambient operating temperature:	-25 °C ... +50 °C
	Ambient storage temperature:	-40 °C ... +75 °C
	UL File No.:	NRKH.E181493
	Housing material:	ABS, Plastic

1) Limit values, operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS tolerances  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) Do not bend below 0 °C  7) A = VS connections reverse-polarity protected  8) C = interference suppression  9) D = outputs overcurrent and short-circuit protected